Wall Liner Systems

Today’s blog post is based on our comprehensive range of wall lining systems.  These wall lining systems are used to line brick, block and concrete walls with the aim to line the background or to improve the thermal or acoustic insulation.  All are suitable for internal application.  Below are a few of our most popular wall lining products.  Or take a look here at fixfactory.ie for  more.

Wall Line Brackets 2 – GL2

This drylining bracket is fire rated to EN1363 and is used for fixing stud to masonry, with a maximum stand off of 75mm.  It is a galvanised mild steel to BS EN 101 42:2000, and comes boxed per 100.

GL_2_BRACVKETS_1_grande[1]

Also there is the wall line bracket 9 -GL9 which too is used for fixings stud to masonry, with a maximum stand off of 125mm and a weight of 5.80kg.

GL9_BRACKET_grande[1]

Wall Line GL1 Wall System

Fix factory wall liner components are manufactured to BS 7364-1990 from pre galvansied materials to BS EN 10327:2004.  This wall liner system is suitable for any type of proprietary plasterboard.  Wall liner can be cut to your required length using the correct powered cutting tools or snips.  Lastly insulation and acoustic materials can be installed for improved sound and thermal performance.

Wall Line GL8 Track 3.6m

Various cavity depths can be created from 25-125mm using bracketry.  If using on substrate materials, treatments may be required for dampness.  Ensure all substrates are strong and suitable for mechanical fixings.  The wall liner can then be cut to your required length, using the correct tools.

This concludes our post today on wall liner systems.  For more info please don’t hesitate to call one of our experienced sales team on 01 835 7424 or take a look here at fixfactory.ie.

Happy building & thanks for reading.

Damien

 

Leave a Reply

Your email address will not be published. Required fields are marked *